Linchuan Precision specializes in the production and development of SMT steel mesh
Focus on improving the pass through rate for SMT Enterprises
Lower production cost
0755-29749682
18928403435
Focus on Improving Direct Pass Rate for SMT Enterprises
Lower production cost
Faq
Your present position:Home / News / Faq

How to remove the misprinted solder paste in SMT patches?

Source: Linchuan Precision  Article author:Linchuan Precision  Time:2019-10-08 09:09  Read: 5957

During the inspection of the quality of the SMT patch, it was found that there was some solder paste on the surface, and it was known that it was misprinted. In order not to affect the overall patch effect, these misprinted solder pastes need to be cleaned up. Is there any feasible way for us to share with us?


If you use the most traditional method, that is, using a small spatula to remove the solder paste from the misprinted board, it may cause some problems. Therefore, we do not recommend this method. The current use of the production process should be more than this, that is, the misprinted SMT board is immersed in a compatible solvent, after a period of soaking, it can be used with a soft brush. Small tin beads are removed from the board.


If the solder paste is more stubborn, it can be immersed and washed several times repeatedly, but be careful not to dry the brush or shovel too much, which will also have an adverse effect on the SMT patch products. Since the longer the operator waits for the misprinting after the solder paste is printed, the harder it is to remove the solder paste, so if the problem is found, it should be placed in the soaking solvent immediately, without delay.


One more thing to remind everyone is to avoid wiping the SMT patch with a cloth strip to prevent solder paste and other contaminants from sticking to the surface of the board. In general, a gentle spray after immersion can help remove excess solder paste. In addition to the above methods, it is recommended that you use hot air drying technology, or solder paste can be detached from the component to restore a good surface.

Last article:如何选择优质smt钢网
Hot products
Linchuan Precision specializes in the production and development of SMT steel mesh
serving over 3,000 customers in 7 years
producing over 200,000 high-quality steel meshes.
Service hotline:0755-29749682/18928403435
Shenzhen Linchuan Precision Technology Co., Ltd.
Tel:0755-29749682  18928403435
E-mail:xjx.smt@163.com
Customer service QQ:254259787     591431201
Company Address: 2/F, Block C, Fengrun Building, Huafeng Second Industrial Park, Gushu, Xixiang, Bao'an District, Shenzhen
粤ICP备17051183号

Sweep up more excitement
  • 合作伙伴 :
Menu
Tel About Us Share
收缩

在线客服

  • 客服 点击这里给我发消息
  • 客服 点击这里给我发消息
  • 曾小姐
    18928403435
  • 罗先生
    18923768657
  • 扫一扫 更多精彩