According to the working principle of the laser cutting machine, the causes and solutions of the burrs are analyzed.
1. The upper and lower positions of the focus of the beam appear to be deviated. Solution: Adjust the position of the focus and adjust it according to the offset position it produces.
2. The output power of the machine is not enough. Solution: Check if the laser cutting machine is working properly. If it is not normal, it needs timely repair and maintenance. If it is normal, check if the output value is correct.
3. The cutting speed of the cutting machine is too slow. Solution: Adjust and increase the wire cutting speed in time.
4. The purity of the auxiliary gas of the cutting machine is not enough. Solution: Explain the increase in the purity of the auxiliary gas.
5. The addition of the laser beam of the cutting machine is offset. Solution: Debug the focus and make adjustments in time.
6. The instability of the laser cutting machine is too long. Solution: Turn off the machine and let the machine rest.
The metal laser cutting machine is a sophisticated machine. The operation is also a fine work. Usually, a data error will cause its work to run abnormally. Therefore, it must be strict and precise in the work to reduce and avoid errors.